Mazut 100
Is a heavy, low quality fuel oil, used in power plants and similar applications. Mazut may be used for heating houses and used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content.
| COMPONENT | RESULT |
|---|---|
| Ash Content, not more % | 0.14 |
| Mass fraction of sulpure , not more %-low-sulphur | 0.5 |
| Temperature of the Flash, not less °C in the | closed crucible |
| In the open crucible °C | Min 110 |
| The Temperature of Solidification, not higher °C | 25 |
| Kinematics Viscosity at 50°C | Max 118 |
| Water Content | 0.50% |
| Mechanical Impurities | Lower than 0.1% |
| Acidity lower than | 5 mg KOH / 100 ml |
| Gross Calorific Value Kcal / kg - KJ / kg | Min 9700 - 41300 |
| Density at 15.0 deg. C kg / l | 0.8900.9200 |
| Hydrogen Sulfide Content (H2S) pom | Max 0.5 |
| Carbon Residua | Lower than 7% |
| Vanadium (V) ppm | 23 |
| Aluminium (Al) ppm | 5 |
| Silikon (Si) ppm | 12 |
| Niekel (Ni) ppm | 29 |
| Asphaltenes m/m | 3.60% |
| Destilation at 4 mm Hg | - |
| Extracted to 760 mm Hg | - |
| Initial Boiling Point deg. C | 216 |
| 5% recovered deg. C | 259 |
| 10% recovered deg. C | 310 |
| 30% recovered deg. C | 445 |
| 40% recovered deg. C | 502 |
| 50% recovered deg. C | 534 |
| 24% recovered deg. C | 358 |
| 60% recovered deg. C | 538 |
| 75% recovered deg. C | 545 |
| 80% recovered deg. C | - |
| 95% recovered deg. C | 550 |
| Final Boiling Point deg. C | 560 |
| Percent Recovered Vol | 78% |
| Residue Vol | 22% |
| Total Nitrogen m/m | 0.19% |
| Sodium (Na) ppm | 15 |
